PolyChoice™ Lens

$87.99

    • 0 $

    Lenses are sold in diopter power. The "typical" power to diopter conversions are listed below. Apparent magnification of each diopter varies based on the actual peep to pin measurement of your setup. You can calculate what your actual lens power would be for each diopter by using this chart.

    Diopter / "Typical" Power: ( +.25 = 2x ) (+.50 = 4x ) (+.75 = 6x ) (+1.0 = 8x )

    • add 12 $
    • add $
    • $
    • add 18 $
    • add $
    • 0 $

    Size of the etched dot around the drilled hole. It must be at least .010" larger than the drilled hole size selected above.

    • 0 $
    • add 30 $
    • add $
    • $
    • $
    • $
    • $

    FVR-1

    Available with: .200 ID, .300 ID, .400 ID Ring.

    FVR-1D

    Available with .200 ID, .300 ID, .400 ID Ring and a Standard .050 dot in the center.

    FVR-2

    FVR-2D

    Standard Dot Size: .060”

    FVR-3

    Available with .200 ID, .300 ID, .400 ID Ring.

    FVR-3D

    Available with .200 ID, .300 ID, .400 ID Ring and a Standard .050 dot in the center.

    FVR-4

    Standard Dot Size: .050”

    FVR-4D

    Available with .030”, .040”, .050”, .060”, .075”, .090”, .100”, .125” Center dot

    • $
    Use the chart below to select outside diameter of your lens or select custom size to specify an exact size. 
    1.750" HHA 1 3/4", Viper 3D, CR 1 3/4", Specialty Archery Pro 1 3/4" Housing, Axcel 41, Sword Titan, Montana Black Gold 1 3/4" , Spark, AV 41, Shrewd Optum 35mm/42mm, Bowfinger 40mm
    1.675" Dialed Arxos
    1.665" CBE Large, 35mm SHREWD, 42mm SHREWD, DS Advantage
    1.400" CBE Small
    1.375" 35mm SURE-LOC, Axcel 32 w/F375 Lens Frame
    1.350" Viper 1 3/8" Target, Specialty Archery Pro 1 3/8", CR 1 3/8" Target, 29mm SHREWD Mini Mag, Axcel 32 w/F345 Lens Frame, Classic Large w/Lens Frame, AV 31, UltraView 1 3/8, Bowfinger 30mm
    29mm Shibuya 29mm, SURE-LOC 29mm, Classic Small
    AV-25 Axcel AV25

    Please note that although we can cut lenses to your exact measurement we perfer to cut them based off of scope size. We have virtually every single scope produced for the market and hand test fit every single lens before it heads out the door. If you would like to specify your lens cut size below please be aware that custom cut size lenses are non-refundable and can not be returned.

PolyChoice™

The PolyChoice™ lenses are made using the highest quality optical grade polycarbonate material from Zeiss.  It utilizes the advantages of an aspheric design providing less distortion.  The Crizal AR coating provides scratch resistance, repels static and fingerprints, and repels water completely.  The lens provides a clear target image at an affordable price.

Lens Power: +.00, +.25, +.50, +.75, and +1.00 Diopter
Drilling Size: .010”, .020”, .030”, .040”, and .060”.
DSA Dot Size: .040”, .050”, .060”, .070”, .080”, .090”, .100”, .115”, .125”
DSA Fiber Size: .010”, .019”, .029”, .040”, .060”, or None

Custom Etching Options

FVR-1

Permanent Reticle FVR-1 Available with: .200 ID, .300 ID, .400 ID Ring. Available in six colors:  Black, Blue, Green, Red, White or Yellow.

Added Cost:  $  40.00

FVR-1D

Permanent Reticle FVR-1D Available with .200 ID, .300 ID, .400 ID Ring and a Standard .050 dot in the center. Available in six colors: Black, Blue, Green, Red, White or Yellow.

Added Cost:  $  40.00

FVR-2

Permanent Reticle FVR-2 Available in six colors: Black, Blue, Green, Red, White or Yellow.

Added Cost:  $  40.00

FVR-2D

Permanent Reticle FVR-2D Available in six colors: Black, Blue, Green, Red, White or Yellow. Standard Dot Size: .060”

Added Cost:  $  40.00

FVR-3

Permanent Reticle FVR-3 Available with .200 ID, .300 ID, .400 ID Ring. Available in six colors: Black, Blue, Green, Red, White or Yellow.

Added Cost:  $  40.00

FVR-3D

Permanent Reticle FVR-3D Available with .200 ID, .300 ID, .400 ID Ring and a Standard .050 dot in the center. Available in six colors: Black, Blue, Green, Red, White or Yellow.

Added Cost:  $  40.00

FVR-4

Permanent Reticle FVR-4 Available in six colors: Black, Blue, Green, Red, White or Yellow. Standard Dot Size: .050”

Added Cost:  $  40.00

FVR-4D

Permanent Reticle FVR-4D Available with .030”, .040”, .050”, .060”, .075”, .090”, .100”, .125”  Center dot available in six colors: Black, Blue, Green, Red, White or Yellow

Added Cost:  $  40.00

DSA (Dual Spectral Aiming system)

The Revolutionary DSA configuration developed in conjunction with legendary archer Jesse Broadwater is a huge leap forward in aiming systems. The DSA or Dual Spectral Aiming system allows the archer to quickly identify an aiming point by offering extra contrast in the visual system. The DSA system is comprised of a small dot on the lens for a background and a colored glowing fiber optic placed in the center of the dot, passing through the lens. The effectiveness of the system is achieved because the fiber stands out strong visually with a small dark ring around the edge of it, hence the name Dual Spectral Aiming (2 colors). The DSA system can be applied to any of our composite or glass lens options.